Share data

Hi everyone,I’m currently creating a column chart with the ODS widgets and I encountered a problem. When I filter values and there is 1 observation displayed with a Y-value close to 1, the Y-axis rescales itself but displays floats (the values can only be integers). I tried to set the column values as integers, but it didn’t fix the issue. I also found a way to solve it by adding <ods-chart ... step=1>, but then it displays too many numbers on the Y-axis when observations have high Y-values.  I hope that I explained my problem clearly 😀Do you have any tips ?Thanks in advance and best regards, DavidAuto-translation 🪄Bonjour à tous, Je suis en train de créer un histogramme avec les widgets ODS et j'ai rencontré un problème. Lorsque je filtre des valeurs et qu'une observation est affichée avec une valeur Y proche de 1, l'axe Y se redimensionne mais affiche des flottants (les valeurs ne peuvent être que des nombres entiers). J'ai essayé de définir les valeurs des colonnes sous form

Hey thereWhen we want to embed a table in an iframe we have the /embed/ endpoint that we can use to hide the ODS header when displaying the dataset. Here is an example:Table with header:https://data.bl.ch/explore/dataset/12060/table/?disjunctive.jahr&disjunctive.gemeinde&disjunctive.kategorie&disjunctive.einheitTable without headerhttps://data.bl.ch/explore/embed/dataset/12060/table/?disjunctive.jahr&disjunctive.gemeinde&disjunctive.kategorie&disjunctive.einheitWe are currently trying to embed a dashboard created with the studio in an iframe. However, we can’t get rid of the header. Example:Dashboard with header:https://data.bl.ch/p/wahlen_nr_sr/Dashboard without header:? Is there a possibility to achieve this? If yes, how? Many thanks for your helpAuto-translation 🪄Salut. Lorsque nous voulons intégrer une table dans une iframe, nous avons le point de terminaison /embed/ que nous pouvons utiliser pour masquer l'en-tête ODS lors de l'affichage de l'ensemble de d

Dear ODS-Community,In the following page https://data.bs.ch/backoffice/pages/code-editor/sauberkeitsdashboard/content/ , we are trying to make use of the “refine-on-click”-feature of the “ods-map-layer”-component. It works pretty good and we like it a lot.Is it also possible to de-select a choropleth-element (assuming refine-on-click-context-replace-refine="false")? Right now it’s just the tooltip that is shown, once something is selected.Ideal would be: Select and De-Select with left-click and the tooltip is shown as mouse-over.Best regards from Basel,BorisAuto-translation 🪄Chère communauté ODS, Dans la page suivante https://data.bs.ch/backoffice/pages/code-editor/sauberkeitsdashboard/content/ , nous essayons d'utiliser la fonctionnalité « affiner au clic » de le composant « ods-map-layer ». Cela fonctionne plutôt bien et nous l'aimons beaucoup. Est-il également possible de désélectionner un élément choroplèthe (en supposant affiner-on-click-context-replace-refine="false") ? Pour le

How do I add more than 100 elements to a filter on a page?  ODS-Widgets: odsSelect (opendatasoft.com)Auto-translation 🪄Comment ajouter plus de 100 éléments à un filtre sur une page ? Widgets ODS : odsSelect (opendatasoft.com)

Hopefully a quick question:Does Opendatasoft have plans to switch of API v1? We have colleagues using and would like to know; and  Could you remind me why API v2 is capped at 100 records, and whether there are plans to remove the limit please? Thanks in advance!Auto-translation 🪄J'espère qu'une petite question : Opendatasoft envisage-t-il de passer de l'API v1 ? Nous avons des collègues qui utilisent et aimerions savoir ; et Pourriez-vous me rappeler pourquoi l'API v2 est limitée à 100 enregistrements, et s'il est prévu de supprimer cette limite, s'il vous plaît ? Merci d'avance!

hi I would like to right the legend for a bar chart directly under the bar. How do I configure this.example: Anzahl SBB-Bahnhofbenutzer (Tagesverlauf) — SBB Auto-translation 🪄salut Je voudrais corriger la légende d'un graphique à barres directement sous la barre. Comment configurer ceci. Exemple : Anzahl SBB-Bahnhofbenutzer (Tagesverlauf) — SBB

I am creating a dashboard with tabs. Due to that I looked into some templates and found this one:https://codelibrary.opendatasoft.com/widget-tricks/ods-simple-tabs/#code-default-look-html-contentFor our porpuse it is importans that the user can filter data in the tab with the map. And go back to the first tab and see the result.However, the template doesn’t work if I do that.To recreate the problem do the following:In the template, first look at the tab with a table on it: Table  tab in the beginning  Then go to the map tab The map tabIn that tab filter on a specific part Filter on the mapGo back to the first TAB (expecting to find a table with only a few rows. And that I do, but the data look very strange:   Auto-translation 🪄Je crée un tableau de bord avec des onglets. Pour cette raison, j'ai examiné certains modèles et trouvé celui-ci : https://codelibrary.opendatasoft.com/widget-tricks/ods-simple-tabs/#code-default-look-html-contentPour notre usage, il est important que le

We have stake holders that are looking into creating a dashboard with visualisations. On the dashboard they want the users to be able to filter the data set being used.That part is easy.But, they like the way the filters (facet) function on the data set page, where you can see the number of “hits” there would be if you filter on a specific thing.The filter in a data setHas anyone solved how this could be done on a dashboard using a “drop-down menu”?We are NOT using the studio, we prefer the “code editor” for pages.Auto-translation 🪄Nous avons des parties prenantes qui envisagent de créer un tableau de bord avec des visualisations. Sur le tableau de bord, ils souhaitent que les utilisateurs puissent filtrer l'ensemble de données utilisé. Cette partie est simple. Mais ils aiment la façon dont les filtres (facette) fonctionnent sur la page de l'ensemble de données, où vous pouvez voir le nombre de "clics". " il y en aurait si vous filtrez sur une chose spécifique. Le filtre dans un ensem

Basel Stadt posted today on LinkedIn promoting the new search on the portal Big news! Searching the Data Portal is now easier than ever 🔍 Similar OGD records, topics, and keywords are now suggested 🧐 in the search Try it out: https://data.bs.ch/Good job Opendatasoft! They even added a tutorial to show people the new search bar and the similar datasets. Other clients such as Basel Landschaft and Canton Fribourg commented that it was also available on their portals 🎉. 

Hello, here are some best practices to improve the referencing and SEO of your portal.What is SEO? As a reminder, SEO (Search Engine Optimization) is a set of techniques used to make a site appear in the results pages of search engines. It gathers technical aspects of web accessibility and takes user needs into account from the point of view of content: who is it for? What answers can the site provide? Moreover, it considers the current situation, if your subject is in the trends, you will have an easier time being positioned correctly on Google.!WARNING! Google favors what it perceives as beneficial for users, and penalizes heavily when it thinks that one is trying to artificially optimize the SEO. The branding Having an explicit domain name means that it should be related to the keywords you consider important. It must be in accordance with your organization and your main services.The title and description of the portal configured in the Appearance - Branding section is also a very i